Cycloidal pinwheel reducer is usually a up-dated of brand-new type transmissing machine made with K-H-V less tooth engagement and the cycloidal pin wheel clenching system, which are trusted in drive and minimizing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical Market, cranes, project machinery etc and conveyors. various fields.
1. Gear is made from high power low carbon alloy steel by carburizing and quenching. The hardness of tooth surface can reach HRC58-62. CNC grinding technology is followed for all with high accuracy, gears and good call performance
2. high transmission effectiveness: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light-weight, long service lifestyle and high bearing potential;
5. convenient to assemble, check and disassemble.
Operation specifications and precautions
1.High modularization design: many equip with various engine or other power suggestions conveniently.Same machine type may equip with various power motor. It really is easy to know the combination and
junction between every machine type.
2.Transmission ratio: okay division, wide scope. The combined equipment type may form very large transmission ratio, i.e. outcome suprisingly low rotary speed.
3.Form of unit installation: the position to be installed isn’t limited.
4.High strength, compact: the box body is made of huge strength cast iron. Gear and equipment shaft adapts the gas carbonization, quenching and excellent grinding process, which means bearing ability of unitvolume is large.
5.Long life: Beneath the condition of accurate type chosen (including choosing suited operation parameters)normal operation and maintenance, the life of main elements of speed reducer (except dressed in parts) should not be less than 20000 hours. The wearing parts include lubricating oil, bearing and oil seal.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,therefore the noise of speed reducer is definitely low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer
1. High acceleration ratio and efficiency
Single stage transmission can reach to 1 1:87 of speed-down ratio and the efficiency is usually more than 90%. If make use of multi-speed get the speed-down ratio is normally bigger.
Being adapted epicyclic transmission theory, the input and productivity shaft are in same axis center, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited anyway content.
1. Large deceleration ratio
A higher deceleration ratio of 1/30-1/320 can be acquired.The structure is simple, but it can realize high reduction ratio device.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are engaged simultaneously, and there are two gears engaged with 180 degree symmetry. Therefore, the impact of tooth pitch mistake and cumulative tooth pitch mistake on the rotation precision is relatively average, which makes the positioning precision and rotation precision reach an extremely high level.
4. Less parts, easy installation
The three basic elements achieve a high deceleration ratio, plus they are all on the same axis, so the kit is easy to install and simple to shape.
5. Small in size and light in weight
Compared with the prior gear device, the volume is 1/3, the pounds is 1/2, but can buy the same torque ability and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel material USES particular steel with excessive fatigue strength.Not the same as ordinary transmission product, the number of teeth meshing accounts for close to 30% of the full total number of teeth. Furthermore, it is in call with the surface, in order that the pressure borne by each equipment is reduced and substantial torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the power loss caused by friction. Therefore, high reduction ratio can be achieved while maintaining high effectiveness, and miniaturization of traveling motor can be realized.
8. Low noise
The gear meshing cycle rate is low, the transmission motion force balance, therefore the operation is quiet, and the vibration is quite small.
◆Large speed ratio and great efficiency single-stage transmission can perform a deceleration ratio of 1 1:87, and the efficiency is more than 90%. If multi-stage transmission can be used, the deceleration ratio will become larger.
◆Because planetary transmission principle is adopted, the suggestions shaft and outcome shaft are on the same axis line, to ensure that the machine model can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is greater, and the mechanism of balancing machine parts causes the vibration and voice limited to a minimum.
◆Reliable use and extended service life for the reason that primary parts are made of substantial carbon chromium steel, excessive strength is definitely obtained by quenching (HRC58-62), and rolling friction is utilized in some transmission contacts, therefore the service life is extended.
Cycloid reducer is going to be a cycloid needle teeth meshing planetary transmission principle drive models, is a great transmission has various advantages, versatile, and will be both negative and positive operation.
•Big ratio, and high efficiency Smooth operation,
• low noise The utilization of reliable,
• long life can reach 50000 hours
• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),
• operation and connection with rolling friction, basically no wear, durable.
• Compact structure,
• little size Because the use of a planetary transmitting, the input shaft and the outcome shaft on a single axis, which makes the model to obtain the smallest possible size.
• Reasonable design, easy maintenance, and breakdown easily install,
• minimal number of parts in addition to basic lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall planet pinion precision, enhance the output strength and carrier.
(2).Hoop clamp coupling have five connection methods ideal for different application environments.
(3).Size in this article PL/PF120(incorporating)precision and high strength integral inner gear casing, processed in a single station,which get rid of the cumulative mistake and assembling mistake of split type.Eliminate casting process;adopt scorching of forging process, that will decrease the blank material defects.
(4).The meshing equipment adopt shaving procedure after carburizing and quenching,which easier to make gear area smooth and high precision,reduce the temperature rising due to gear surface gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its effectiveness and mounting dime nsions conform the same sorts of foreign.
The blend of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square beautiful shape, shape, radiate heat efficiently, low noise and compact structure.
Great sealing and adaptability.Its mixture with T gear reducer and MB/MBN variator can meet all types of speed requirement.