Any damage over the teeth surfaces of a sprocket diminishes the life of your conveyor chain.
With conventional sprockets, significantly worn sprocket teeth were repaired by teeth padding or the total sprocket was replaced. In both case, restore was expensive and with teeth padding, accuracy was impaired. We developed new sprockets with detachable teeth for independent substitute. This sprocket is extremely rated by our shoppers for that dramatic savings in cost and time.
Structure
The teeth is usually replaced by two techniques: individual tooth substitute or sectional teeth replacement.
The bolts and nuts utilised for mounting the teeth on on the sprocket are spot-welded to stop loosening.
The respective structures are illustrated to the ideal.
The above photograph along with the top rated ideal illustration demonstrate a sprocket for person tooth substitute. Since the joint face concerning the replaced teeth plus the sprocket is formed within a unique arc, the bonding accuracy is higher and also the sprocket strength is enhanced. Moreover, since the load acting over the mounting bolts is decreased, there is significantly less probability of loosening. This sprocket development is patented.
You will find two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are employed for big sprockets obtaining hefty loads and welded sheet steel hubs for other applications.