We – EPG Group the biggest couplings and gears manufacturing unit in China with 5 diverse branches. For much more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /
The function of the flying shear
1, As the head and rear part of the rolling parts have some defect or the temperature of steel is too low, the flying shear need to cut the head and rear to insure the quality of the rolling parts before it gets into the finishing mill.
2, The flying shear will cut the rolling parts immediately if any failure occurs to the finishing mill, then the switch will turn the parts to snap shear to snap.
Main technical performance
|Steel to be processed
|Carbon metal, reduced alloy metal
|a hundred and fifty~230mm
|Rotary sword diameter
Equipment composition and structural characteristics.
Flying shear is composed by transmission equipment, cutting support base and upper & lower spindle. Rotary tool rest has installed backsword, two spindles which are parallel with start-stop work system. Tool rest makes one revolution to finish one cutting period. Motor drive the spindle through reduction gears and make the upper, lower spindle rotated through the gear.
The lower spindle is connected with transmission equipments. Motor adapt separately ventilated machine and equipped speed measuring motor to measure the speed of the direct motor. Safety gear coupling is installed between the motor and reduction gears to insure the safety to use the equipment.
Cutting support base is a welded case with four-layers, it has four gear rolls inside, including upper, lower spindle and the others are transition gear rolls
Upper spindle has optical-electricityencoder to control the start-stop position of the shear blade in the processing of the cutting.
Recycled lubrication is adopted for internal gear and bearing of the shearing machine with dilute oil supplied by outside dilute oil station. Sump lubrication is applied for redactor.
one. Best rolling mill remedies such as rolling passes layout, generation line set up, and workshop format according to customer’s requirements.
2. Innovative rolling mill stands and auxiliary equipments/spare elements utilized in the rolling mill manufacturing line. (This sort of as roller box, gearbox reduction, coil laying head, vertical and side loops, flying shears, chopping shears and gripping shears, pinch roll device and so on)
three. Technical providers and post-sale technological supports.
4. Skilled engineers available for overseas set up and routine maintenance.
/ The use of original products manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our business and the listed EPT areas contained herein are not sponsored, authorized, or produced by the OEM. /