Materials Handling Power UNIT two
Basic Description
This power unit options electrical power up gravity down circuit. Activate the start solenoid to start the motor to lift the machine. The lowing motion is activated through the solenoid valve with all the reducing velocity controlled from the strain compensated flow management valve. Items of this series might be widely utilized in the field of logistic units such as fork lift, mini lift table, etc.
Particular Notes
one. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic elements concerned in advance of mounting the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which really should also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
four. Oil transforming is required soon after the first one hundred operation hrs,afterwards once every 3000 hours.
5. The electrical power 
unit really should be mounted horizontally.
Materials Dealing with Electrical power UNIT one
General Description
This power unit is designed for the fork lift market, consisting of remarkably effective gear pump, DC motor, manual increase and lower valve, tank, ect. The up and down movement are managed by the lever from the guide release valve, and that is equipped with an electrical switch to activate the motor. The lowing velocity is controlled from the stress compensated flow management valve.
Special Notes
one. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean all the hydraulic components concerned prior to installation of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of charge of impurities, N46 hydraulic oil is advisable .
four. Oil altering is needed right after the first 100 operation hrs, afterwards when each and every 3000 hours.
five. The electrical power unit proven is intended to be mounted horizontally.