Elastomer In Shear Sort Couplings
The very simple style with the S-Flex coupling assures ease of 
assembly and reputable effectiveness. No special resources are desired for set up or elimination. S-Flex couplings may be used in a wide selection of applications.
Capabilities
Straightforward to put in
Servicing Free
No Lubrication
Dampens Vibration and Controls Shock
Torsionally Soft
Double Engagement
Qualities and Efficiency Details
The S-Flex coupling layout is comprised of 3 elements: two flanges with internal teeth engage an elastomeric flexible sleeve with external teeth
Torque is transmited by means of the flanges mounted on the two the driver and driven shafts via the sleeve
Misalignment and torsional shock loads are absorbed by shear deflection within the sleeve
The shear characteristic on the S-Flex coupling is quite properly suited to absorb affect loads
The S-Flex coupling provides combinations of flanges and sleeves which can be assembled to fit your certain application
Thirteen sizes can be found with torque abilities that range from 60 in-lbs to 72,480 in-lbs
The S-Flex flanges are supplied in 5 versions which are created from zinc or cast iron
Sleeves are available in EPDM rubber, Neoprene to address a wide selection of application prerequisites
Protection from misalignment, shock, and vibration:
PARALLEL:
The S-Flex coupling accepts as much as .062 in of parallel misalignment without put on. The flexible coupling sleeve minimizes the radial loads imposed on gear bearings, an issue typically connected with parallel misalignment.
AXIAL:
The S-Flex couplings might be utilized in applications which demand a constrained level of shaft end-float without the need of transferring thrust loads to products bearings. Axial motion of approximately 1/8 inch accepted.
ANGULAR:
The flexing action in the elastomeric sleeve plus the locking attribute of your mating teeth allows the S-Flex coupling to properly deal with angular misalignment up to 1??.
TORSIONAL:
S-Flex couplings effectively dampen torsional shock and vibration to safeguard linked equipment. The EPDM and Neoprene sleeves have torsional wind-up flexibility of 15?? at their rated torque. Hytrel provides 7??wind-up.
