SNOW PLOW Electrical power UNIT

Common Description
Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is created to operate material managing tools. The decreasing movement is achived from the solenoid valve with the reducing speed controlled by an adjustable needle valve. The left and suitable functions are outfitted using a dual pilot operated verify valve and cross-over relief valves.
Remark: Please check with our product sales engineer for the distinct pump displacement, motor electrical power or tank capacity.
Special Notes
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned prior to installation of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and totally free of impurities.N46 hydraulic oil is suggested.
four. This energy unit really should be mounted horizontal.
five. Check the oil degree from the tank soon after the very first start off of the energy unit.
6. Oil shifting is needed immediately after the first 100 operation hours, afterwards as soon as just about every 3000 hrs.